|
|
Build Your Online Product Catalogs?
| Product Name: |
Addition Cure Mold Making Silicone Rubber
|
| Supply Ability: |
8ton/day |
| Related proudcts |
rubber, silicone, silicone rubber, |
| Specifications |
silicone rubber |
| Price Term: |
|
| Port of loading: |
shenzhen |
| Minimum Order |
100kg |
| Unit Price: |
9.44-12.8usd |
|
Description
HY-E610 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It’s a kind of food grade silicone and mainly used for mold making.
Application
HY-E610 silicone rubber is mainly used for lifecasting,making molds of concrete stone,GRC,polyurethane products ; wax, candle decoration ; rapid prototyping and tyre molds; chocolate,candy and similar products .
Technical Parameters
Model Color Mixing ratio (%) Pot life (mins,
under 25â„? Curing time
Hardness  ( Shore A ) Tensile-
strength (***) Tear-
strength (kN/m) Viscosity
（After A/B mixed ,***.s�Shrinkage
rate (%) Elongation
ï¼?ï¼?
HY-E610 Translucent 1:1 20-40 4-5(hrs under 25â„?
20-30 (mins under 60� 10±2
4.0±0.5
20±5
3500±1000
�.1% 400%
Characteristics
＊An exceptional fluidity and good operability, easy to demold
＊Good tensile and tear strength
＊Outstanding bubble releasing
＊Non-deformation
＊Low shrinkage
＊Aging resistance ,high temperature resistance (200�
＊Environmentally, food-grade
Operation instructions
Step 1: prepare the original molds
Prepare an perfect original mold and clean it totally before operation .
＊Notes:Make sure your original molds and operation tool cleaned up totally to avoide uncure problem .
Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
＊Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
|
| Company: |
SHENZHEN HONG YE JIE
|
| Contact: |
Ms. kaka long |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, |
| Postcode: |
518117 |
| Tel: |
86075589212365 |
| Fax: |
+86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
